Homedesign

X252

200x200-X252The LaserPro X series offers an economical alternative for laser cutting and engraving. The LaserPro X series is equipped with dependable sealed CO2 laser which offers a reliable source of 80W and 100W of power for mass production requirements.

adobe-pdf-logoDownload brochure

 

 

 

 

Easy-to-use Control Panel
A control panel with coherent hot-key design and graphic icon displays that allows you to directly change the laser parameter setting, set jobs to repeat unlimited times, queue job, delete jobs, and more.
Programmable Origin
Designed for simplifying complex tasks, the LaserPro X252 user-friendly interface is a great facilitator to provide powerful function settings.
SmartBOX™ Cutting Accessory (Optional)
The innovative design is composed of a ventilation box, a honeycomb table and rearrangeable magnetic supporting pieces. The SmartBOXTM provides great cutting quality and remarkably enhance air extraction.
Motion System with DC Servo Motor 
The LaserPro X252 utilizes a high speed closed-loop DC servo motor for precise and fast carriage movement to ensure exceptionally accurate cutting outputs.
Pass-through Front and Rear Doors
This convenient front and rear door design enables operators to load extremely long working pieces.
Autofocus
Patented Autofocus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Autofocus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.
Emergency Stop
Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operational environment.
SmartMEMORY™(Optional)
SmartMEMORY™ allows you to save daily jobs into the engraver so that every morning your graphics are ready to go.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SmartBOX™
SmartBOX™
An innovative technology that integrates the ventilation box with a honeycomb table. The result is not only a precise cut with sharp edges, but also a clean laser table to work on.
Rotary Attachment
Rotary Attachment
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball! The minimum/maximum diameter and length of the working object is 90/180mm and 450mm respectively. Its maximum weight should not exceed 7kg.
SmartAIR™ Fine Nozzle
SmartAIR™ Fine Nozzle
The optional SmartAIR Fine Nozzle is recommended for engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.
Air Extraction System
Air Extraction System
LaserPro’s Air Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated by the laser process. Available for all LaserPro engravers, the Laserpro Air Extraction System represents the latest in fume extraction and odor reduction technology for all types of applications. Quiet operation, high vacuum capacity, compact design and long life expectancy are a few its outstanding features. Each LaserPro Air Extraction System is powered by a maintenance-free, continuous-running turbine. In order to ensure personnel safety and legal compliance, the LaserPro Air Extraction System is CE-compliant for Europe and ETL-certified for the United States and Canada.
Air Compressor
Air Compressor
A specifically designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartMEMORY™
SmartMEMORY™
The SmartMEMORY is designed to provide a new perspective on efficiency. It is an intelligent device embedded within the main-board that enables the user to load and save files to the LaserPro laser engraver for long-term storage and eliminates the need of a PC. The SmartMEMORY is portable and can be easily transferred from on LaserPro to another. This break-through technology is available for the Explorer and Spirit series.
SmartGUARD System
SmartGUARD System
Laser cutting and engraving operation using the SmartGUARD system assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Honeycomb Table
Honeycomb Table
This Honeycomb Table is like no other table made for laser engraving or cutting. By using a uniquely designed cutting surface, cutting acrylic, wood, plastic, polycarbonate and rubber is easier than ever! The Honeycomb Table is designed for engraving medium to large items (Over 4″). When doing vector cutting put under the media to vent out heat and smoke.
X252RX
Wattage 80W 100W
Laser Source Sealed CO2 Laser
Cooling Water Cooled
Working Area 25 in. x18 in. (635 x 458 mm)
Max. Part Size (W x L x H) All doors closed 27 x 19 x 6.5 in. (685 x 482 x 165 mm)
All doors closed 27 x ∞ x 6.5 in. (685 x ∞ x 165 mm)
Table Size 31.1 x 20.9 in. (790 x 530 mm)
Dimensions  (W x L x H) 64.9 x 36.6 x 40.9 in. (1650 x 930 x 1040mm)
Drive Closed-loop DC servo control
Maximum Motor Speed 40 IPS
Speed Control Adjustable from 0~100% (Up to 16 color-linked speed settings per job)
Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
Distance Accuracy 0.254 mm or 0.1% of move, whichever is greater
Z-Axis Movement Automatic
Computer Interface Standard printer port and USB 2.0** port
Memory Buffer 32 MB standard
Safety Class 2 for red pointer
Facility Requirements
Operation Voltage 200-240 Volt AC
Power Consumption 1320W
Water Chiller Water Chiller required
Air Exhaust System External exhaust system required

*Speed is not equal to throughput. See dealer or visit www.GCCworld.com for more details.
** File transmission at USB 2.0 Full Speed rate.

Specifications are subject to change without prior notice.

 
Packaging cutting

Packaging cutting
Twill Cutting with X-Series

Twill Cutting with X-Series
Christmas Decoration

Christmas Decoration
Door Sign

Door Sign
Create a fashion T-shirt

Create a fashion T-shirt
Create 3D Objects with Autodesk 123D Make

Create 3D Objects with Autodesk 123D Make
Laser Cutting Stencil

Laser Cutting Stencil
Inlay Necklace

Inlay Necklace
Big Model

Big Model
Title Download
X252_X380 & MG380Hybrid X rollers changing process.pdf download
X252_X380 & MG380Hybrid X motor and auto focus cable changing process.pdf download
X252_X380 & MG380Hybrid power board changing process.pdf download
X252_X380 & MG380Hybrid mirror and lens cleaning process.pdf download
X252_X380 & MG380Hybrid main board changing process.pdf download
X252_X380 & MG380Hybrid Control Panel Changing process.pdf download

Leave a comment