Homedesign

Mercury III

products_newMecury

LaserPro Mercury III carries the fine tradition of the Mercury series to provide stable engraving quality. The servo motor enables fast movement of lens carriage while maintaining accuracy over time, giving you reliable and dependable results. Mercury III is reinforced with new features, including key switch, user-friendly control panel, and SmartCENTER.

adobe-pdf-logoDownload brochure

 

 

 

RoHS Compliance
As a market leader and an environment-friendly product manufacturer, GCC is committed to make all-out efforts to preserve the global environment. Our products are compliant with the European Parliament Directive 2002/95/EC, Restriction of Hazardous Substances(RoHS).
Flexible 3D and Stamp Engraving
Advanced print driver with over 200 level gray scales to presents you fabulous 3D engraving output. And through the intelligent stamp engraving mode you can create a fantastic logo stamp.
Closed-loop DC Servo Motor
A Closed-loop DC servo motor can deliver greater continuous shaft power at higher speeds than a stepper of the same frame size. In addition, It can also give far greater accuracy due to the continuous movement, instead of constant stopping and starting.
Autofocus
Patented Autofocus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Autofocus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.
Pass-through Front/Rear Doors
A design with doors on both ends to accommodate extremely long working pieces without the need for a screwdriver.
Drag-N-Engrave
An exceptionally innovative and user-friendly feature based on servomotor technology simplifies operations and shortens setup time. Simply hand drag the lens carriage to the desired position to be engraved and press the Start button to commence job.
Easy to Use Control Panel 
A control panel with coherent hot-key design and graphical icon displays that allows you to change laser parameter settings, set jobs to repeat unlimited times, queue jobs, delete jobs, and more.
Key Switch Emergency Stop
Key switch safeguards the machine from unauthorized use.Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.
Reliable and Made in USA CO2 Lasers
The CO2 laser is a critical part of a laser engraver. GCC Laserpro offers the best and most reliable CO2 laser available in the industry. Synrad* CO2 lasers are built in the United States with the most advanced laser technology. The laser product is proven to be the most reliable brand with tens of thousands of installations all over the world.
* in selected models
Rotary Attachment
Rotary Attachment
Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball! The minimum/maximum diameter and length of the working object is 90/180mm and 450mm respectively. Its maximum weight should not exceed 7kg.
SmartAIR™ Fine Nozzle
SmartAIR™ Fine Nozzle
The optional SmartAIR Fine Nozzle is recommended for engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.
Air Extraction System
Air Extraction System
LaserPro’s Air Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated by the laser process. Available for all LaserPro engravers, the Laserpro Air Extraction System represents the latest in fume extraction and odor reduction technology for all types of applications. Quiet operation, high vacuum capacity, compact design and long life expectancy are a few its outstanding features. Each LaserPro Air Extraction System is powered by a maintenance-free, continuous-running turbine. In order to ensure personnel safety and legal compliance, the LaserPro Air Extraction System is CE-compliant for Europe and ETL-certified for the United States and Canada.
Air Compressor
Air Compressor
A specifically designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartMEMORY™
SmartMEMORY™
The SmartMEMORY is designed to provide a new perspective on efficiency. It is an intelligent device embedded within the main-board that enables the user to load and save files to the LaserPro laser engraver for long-term storage and eliminates the need of a PC. The SmartMEMORY is portable and can be easily transferred from on LaserPro to another. This break-through technology is available for the Explorer and Spirit series.
SmartGUARD System
SmartGUARD System
Laser cutting and engraving operation using the SmartGUARD system assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Honeycomb Table
Honeycomb Table
This Honeycomb Table is like no other table made for laser engraving or cutting. By using a uniquely designed cutting surface, cutting acrylic, wood, plastic, polycarbonate and rubber is easier than ever! The Honeycomb Table is designed for engraving medium to large items (Over 4″). When doing vector cutting put under the media to vent out heat and smoke.
Mercury III ME-12 ME-25 ME-40 ME-T60i
Laser Source 12W 25W 40W 60W
Sealed CO2 Laser
Cooling Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
Work Area 25 x 18 in. (635 x 458 mm)
Maximum Part Size(W x L x H) All doors closed 27 x 19 x 6.5 in. (685 x 482 x 165 mm)
All doors open 27 x ∞ x 6.5 in. (685 x ∞x 165 mm)
Table Size 31.1 x 20.9 in. (790 x 530 mm)
Dimensions (WxDxH) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
Drive Closed-loop DC Servo Control
Maximum Speed* 42 IPS
Throughput* 166.3 in2 / hr (1072.8 cm2 / hr)
Speed Control Adjustable from 0.1-100% (Up to 16 color-linked speed settings per job)
Power Control Adjustable from 0 -100% (Up to 16 color-linked power settings per job)
Distance Accuracy 0.254mm or 0.1% of move, whichever is greater
Z-Axis Movement Automatic
Focus lens Standard 2.0″, optional 1.5″, 2.5″ & 4.0″ available
Resolution (DPI) Available 125, 250, 300, 380, 500, 600, 760, 1000
Computer Interface Standard printer port and USB 2.0** port
Compatible Operating Systems MS Windows
Memory Buffer 32MB standard
Display Panel 4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus
Safety Class 2 for red pointer
Standard Feature
Auto Focus V
Red Dot Pointer V
Pass Through Doors V
3D and Stamp Mode V
Facility Requirements
Operation Voltage Below 40 Watt, 100 -240 Volt AC Auto Switching
40 Watt and above, 200 -240 Volt AC Auto Switching
Power Consumption 700W 880W 1740W 2000W
Air Exhaust System External exhaust system required,one 4″ connection on the back of the machine.

*Speed is not equal throughput. See dealer or visit http://www.gccworld.com for more details.
** File transmission at USB 2.0 Full Speed rate.

Specifications are subject to change without prior notice.

 
Photo Engraving with Dithering Pattern

Photo Engraving with Dithering Pattern
Twill Cutting with X-Series

Twill Cutting with X-Series
Food Engraving

Food Engraving
Embossing seal with laser engraving

Embossing seal with laser engraving
Metal Engraving with LaserInk

Metal Engraving with LaserInk
Customized Tambourine Engraving

Customized Tambourine Engraving
Engraving Product Label

Engraving Product Label
Book Cover

Book Cover
Christmas Decoration

Christmas Decoration
Door Sign

Door Sign
Create a fashion T-shirt

Create a fashion T-shirt
Create 3D Objects with Autodesk 123D Make

Create 3D Objects with Autodesk 123D Make
Laser Cutting Stencil

Laser Cutting Stencil
Inlay Necklace

Inlay Necklace
Roll to Roll Auto Feeder Function

Roll to Roll Auto Feeder Function
Notebook engraving

Notebook engraving
Create your own iPhone case with laser engraver

Create your own iPhone case with laser engraver
Big Model

Big Model
Night light Engraving

Night light Engraving
Placemats Engraving

Placemats Engraving
Laser Engraving Offers more Inspired Creations to your Life

Laser Engraving Offers more Inspired Creations to your Life
Marking the anodized aluminum spring hooks

Marking the anodized aluminum spring hooks
Title Download
Mercury III X motor changing process download
Mercury III Power Board changing process download
Mercury III Mainboard changing process download
Mercury III lens carriage roller changing process download
Mercury III Control panel changing process download

Leave a comment