Homedesign

Venus II

products-VenusII-300X200_1

LaserPro Venus II is not only the most compact LaserPro laser engraver but also comes with easy-to-use interfaces. Use the Windows-based software to make fine pitch-based adjustments in engraving flat, convex or concave surfaces. Venus is also the perfect choice for stamp making.

adobe-pdf-logoDownload brochure

adobe-pdf-logoProduct review

RoHS Compliance
As a market leader and an environment-friendly product manufacturer, GCC is committed to make all-out efforts to preserve the global environment. Our products are compliant with the European Parliament Directive 2002/95/EC, Restriction of Hazardous Substances(RoHS).
Drag-N-Engrave
An exceptionally innovative and user-friendly feature based on servomotor technology simplifies operations and shortens setup time. Simply hand drag the lens carriage to the desired position to be engraved and press the start button to commence job.
User-Friendly Interface
LaserPro windows based driver provides powerful function settings, such as engrave mode, programmable origin, various dithering types and more to meet users’ specific needs.
Autofocus 
Patented Auto Foucus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Auto Focus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.
Large Working Area
A4 size working table and the unique dust collecting mechanism allows the full table rubber stamp to be engraved and debris to be gathered easily all at once.
Windows-based Driver 
Windows-based drivers offer plenty of functionality, including pitch tuning to adjust for a vertical profile for each character during stamp engraving.
Stable Operation
A high speed Closed-loop DC Servo motor shortens the overall engraving time, while maintaining excellent engraving quality.
Flexible Air Tube
The unique air tube device has three options for modifying the diameter of the air tube. When the device is adjusted to its maximum, the airflow can be forced through the back of the air tube directly into the odor reduction system.
Special Fire Retardant Material
The flexible right and left table shields are designed to coordinate the up down Z rail. These two shields isolate the airflow in the middle of the working table; thus, the possible damage caused by the heat is reduced.
Unique Feature for Making Stamps
The 2″ diameter hole is provided for stamps with a longer body. The size of this pit fits to your stamp sample perfectly. Just position the stamp stick into the hole. Longer stamps can be made with ease.
Reliable and Made in USA CO2 Lasers
The CO2 laser is a critical part of a laser engraver. GCC Laserpro offers the best and most reliable CO2 laser available in the industry. Synrad* CO2 lasers are built in the United States with the most advanced laser technology. The laser product is proven to be the most reliable brand with tens of thousands of installations all over the world.
* in selected models
Dust Prevention Window
Dust Prevention Window
When the laser system is on duty, it will bring a lot of dust result from the material and it will contaminate the lenses and mirrors. Dust Prevention Window can keep lenses and mirrors clean to promote longer laser life and increase the effect of air induction.
Air Extraction System
Air Extraction System
LaserPro’s Air Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated by the laser process. Available for all LaserPro engravers, the Laserpro Air Extraction System represents the latest in fume extraction and odor reduction technology for all types of applications. Quiet operation, high vacuum capacity, compact design and long life expectancy are a few its outstanding features. Each LaserPro Air Extraction System is powered by a maintenance-free, continuous-running turbine. In order to ensure personnel safety and legal compliance, the LaserPro Air Extraction System is CE-compliant for Europe and ETL-certified for the United States and Canada.
Air Compressor
Air Compressor
A specifically designed Air Compressor for laser engravers, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartMEMORY™
SmartMEMORY™
The SmartMEMORY is designed to provide a new perspective on efficiency. It is an intelligent device embedded within the main-board that enables the user to load and save files to the LaserPro laser engraver for long-term storage and eliminates the need of a PC. The SmartMEMORY is portable and can be easily transferred from on LaserPro to another. This break-through technology is available for the Explorer and Spirit series.
Venus II VII-12 VII-30
Laser Source 12W 30W
Sealed CO2 Laser
Cooling Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
Work Area 11.8 in. x8.3 in. (300 mm x 210 mm)
Max. Part Size (W x L x H) 14.2 in. x 11.8 in. x 2.8 in. (360 mm x 300 mm x 70 mm)
Dimensions  (W x L x H) 24.4 in. x 17.1 in. x 18.1 in. (620 mm x 435 mm x 460 mm)
Weight 32 Kg / 70 lb 37 Kg / 81 lb
Drive Closed-loop DC Servo Control
Maximum Speed* 20 IPS
Throughput* 110.7 in2 / hr (714.1 cm2 / hr)
Speed Control Adjustable from 0.1 to 100% (Up to 16 color-linked speed settings per job)
Power Control Adjustable from 0-100% (Up to 16 color-linked power settings per job)
Distance Accuracy 0.254mm or 0.1% of move, whichever is greater
Z-Axis Movement Automatic
Focus Lens Standard 1.5″, optional 2.0″ available
Resolution (DPI) Available 200, 250, 300, 500, 600, 1000
Computer Interface Standard printer port and USB 2.0** port
Compatible Operating Systems MS Windows
Memory Buffer 32 MB standard
Display Panel 4-line LCD panel showing current file name, total working time,
laser power, engraving speed, file(s) loaded into memory buffer,
setup and diagnostic menus.
Safety Class 2 for red pointer
Standard Feature
Auto Focus V
Red Dot Pointer V
Flexible Air Tube V
3D and Stamp Mode V
Reserved Stamp Jig V
Facility Requirements
Operation Voltage 100V-240 Volt AC Auto Switching
Power Consumption 700W 2000W

*Speed is not equal throughput. See dealer or visit http://www.gccworld.com for more details.
** File transmission at USB 2.0 Full Speed rate.

Specifications are subject to change without prior notice.

Patented Ultimate Ventilation System: Modifying Airflow Tube Size
GCC LaserPro is proud to introduce the patent registered Ultimate Ventilation System built in the GCC LaserPro VenusII. This patented design offers you an even better ability to centralize the airflow and squeeze out the irritating bits and pieces.

The unique Ventilation System has three different options for modifying the diameter of air tube in the back of laser system, and operators are able to center or seal off the airflow under the work table by the flexible right and left table shields with the coordination of stamp engraving with Laser engraving machine the Z rail. Special fire retardant material of the shields not only reduces the possible damage caused by the heat, but also withstands the harsh stamp making environment. An assistant board to secure the work piece on the table is suggested, and it also seals off the exposed holes to make the Ventilation System much more effective.

The capability of navigating the formed airflow is critical to sustain the output quality. Now with its compact designs and the extremely effective ventilation system, GCC LaserPro Venus II has successfully become the most popular desktop model in the market
Auto Focus
With just simply one button touch, your laser focus automatically sets itself on the engraving work table. GCC LaserPro provides many remarkable innovations on GCC LaserPro laser engravers and this time the patent registered Auto Focus device sets the precise focal point in no time without any guesswork. It is not an expensive optional item, but a standard feature on GCC LaserProSpirit,Spirit GE,Spirit GX, Explorer, Mercury II and Venus models.

When precision is a factor, the Auto Focus is an effective tool to prevent human error when focusing the lens to a specific distance from the surface of work material. The laser beam is five thousands (.005) of an inch in diameter. It is extremely accurate and requires an exact distance for optimum quality. In a nutshell doing this manual method is prone to human error. Whether the 1.5″, 2″, or 4″ lens you are going to use, you must focus the lens to specific the distance from material surface. Although we still include the tool to do this manually, why would you? With the press of a single Auto Focus button, the work bed will automatically move upward to meet the focus gauge and then downward to the correct position. No matter what kind of work surface that you work with, (flat, concave or convex) the Auto Focus result is perfect every time. Your engraving projects become faster and precise with excellent quality to help you increase productivities and profits.

Photo Engraving with Dithering Pattern

Photo Engraving with Dithering Pattern

Packaging cutting

Packaging cutting

Twill Cutting with X-Series

Twill Cutting with X-Series

Food Engraving

Food Engraving

Embossing seal with laser engraving

Embossing seal with laser engraving

Metal Engraving with LaserInk

Metal Engraving with LaserInk

Customized Tambourine Engraving

Customized Tambourine Engraving

Engraving Product Label

Engraving Product Label

Book Cover

Book Cover

Christmas Decoration

Christmas Decoration

Door Sign

Door Sign

Create a fashion T-shirt

Create a fashion T-shirt

Create 3D Objects with Autodesk 123D Make

Create 3D Objects with Autodesk 123D Make

Laser Cutting Stencil

Laser Cutting Stencil

Inlay Necklace

Inlay Necklace

Roll to Roll Auto Feeder Function

Roll to Roll Auto Feeder Function

Notebook engraving

Notebook engraving

Create your own iPhone case with laser engraver

Create your own iPhone case with laser engraver

Big Model

Big Model

Night light Engraving

Night light Engraving

Placemats Engraving

Placemats Engraving

Easter Holiday Gift

Easter Holiday Gift

Ornamental Clock

Ornamental Clock

Leather Cutting

Leather Cutting

Cutting Film

Cutting Film

Christmas Gifts

Christmas Gifts

Rhinestone on trophy & award

Rhinestone on trophy & award

Wood engraving with SmartCENTER function

Wood engraving with SmartCENTER function

Using Advanced Shoulder Level to Create your Own Stamp

Using Advanced Shoulder Level to Create your Own Stamp

Rhinestone Application

Rhinestone Application

Carousel Model Application

Carousel Model Application

Beautiful Wood Inlay Application

Beautiful Wood Inlay Application

LaserPro DirectPrint MAC AI Plug-in

LaserPro DirectPrint MAC AI Plug-in

Engraving 1D Barcode with XY Table

Engraving 1D Barcode with XY Table

Braille engraving with 3D Mode

Braille engraving with 3D Mode

Laser Engraving Offers more Inspired Creations to your Life

Laser Engraving Offers more Inspired Creations to your Life

Marking the anodized aluminum spring hooks

Marking the anodized aluminum spring hooks
Title Download
Venus II X motor changing process download
Venus II Power Board changing process download
Venus II Mainboard changing process download
Venus II lens carriage roller changing process download
Venus II Control panel changing process download

Leave a comment